Hi,It's odd. I just got a new F2-424 (The F2 only refers to the HDD slots - the 424 refers to the generation/model) and I did nothing with secure boot and it was not enabled as far as I can see. I was able to instal my 2 hdd with TOS6 installed and it ran fine (mostly, except cooling issues). I have not upgraded to the latest TOS6.420 yet so that might be interesting if it requires secure boot to be enabled (because of the change to the root file system).
{In the event, I doubt TM would expect it to be enabled as they would then have to deal with systems that don't have it, users who don't understand it and those users who would almost certainly mess up the bios.}
}They have it enabled and its ability to work is due to the fact that the NAS boots to the flash drive all the time first. If you review GRUB configuration, the system can boot in either INIT mode or RAID mode. RAID mode would cause the internal flash drive to boot to TOS, and INIT mode would cause your NAS to go through the initialization setup routines.
Statistics: Posted by bretwashere — Yesterday, 20:34