Sorry for reviving such an old thread but I ended up here after a few hours of troubleshooting. I could not connect via File Explorer to the NAS IP or mount the drive, but I could get to the web interface of my F4-210. I tried all of the troubleshooting steps described in the original post but still could not connect successfully.
Then I remembered that something looked off when looking at the Certificates loaded - all 3 were expired, long long ago. I came to discover that the date and time were so far off (year 2050) that the online time sync was unable to properly amend the setting.
To fix this, go to Control Panel > Region & Language > Time
Then set time to Manual and override the default settings.
Now SMB connects at full speed with no issues.
Hopefully someone else stumbles upon this while trying to build a budget NAS with one of these limited devices.
Then I remembered that something looked off when looking at the Certificates loaded - all 3 were expired, long long ago. I came to discover that the date and time were so far off (year 2050) that the online time sync was unable to properly amend the setting.
To fix this, go to Control Panel > Region & Language > Time
Then set time to Manual and override the default settings.
Now SMB connects at full speed with no issues.
Hopefully someone else stumbles upon this while trying to build a budget NAS with one of these limited devices.
Statistics: Posted by alkaisersaga — Today, 01:05