Initialization • F5-221 Not on network after power failure

I have an F5-221 which has been set up and working for about 3 years, but I had a power failure and can no longer access it. The power light and all 5 hard drive lights on the front panel are on, the LAN light is flashing as if data is going through, and even the indicator light on the port of the switch it is plugged into is lit, which would seem to indicate it is connected correctly. But none of the computers that had drives mapped to it can access it. The mapped drive in Windoze File Explorer has a red X, and I get "Windows cannot access 192.168.x.x" TNAS PC cannot find it, and neither can Ping or Arp -a. HDCP is running on the router, but the unit does not even show up in the router's network page. All this leads me to believe (in my limited network experience) that something in the power failure caused the F5 to reset its ip address to a different subnet, but is there a way to reset it, short of restarting it with the drives removed and starting over? And can that be done safely without losing my data?

Thanks

Statistics: Posted by dclaxon — Today, 04:57

---