System Configuration • Re: The RAM usage of F2-210/F4-210 keeps increasing？
I made this change when running TOS 4.2.43 (though noted that the task config file is located in /etc/crontabs/root)Since upgrading to 4.2.44, I've noticed memory seems to be creeping up after a month...
View ArticleThunderbolt 3 Series • Re: TD2 Raid1 orange light
Hi, what's the status of the TD2's lights and capacity now? Is it working properly?We've noticed an unusual operation.TD2 does not support capacity expansion, even if you replace two 1.5TB with two...
View ArticleHardware, Power and Accessories • Re: F4-210 High Meomry Utilization
Regarding the gradual increase in RAM usage on the 210 model, this may help:viewtopic.php?t=5124Thank you for the reference i have setup a cron job as shown from the other post.I have also restarted...
View ArticleStorage • Re: Agregar disco - volumen, y migrar datos en F5-221
Forgive me for not fully understanding your Spanish description and replying in English..If you want to copy data from Volume 2 to Volume 3, there are many ways you can do it.You can map each folder...
View ArticleSystem Resources • Re: TNAS F2 212 Disk Thrashing
In order to find out the problem you encountered, we can arrange for you to have an engineer to investigate the problem remotely.If you agree, please contact our technical support mailbox or the...
View ArticleUSB Series • D2-310 green led flashing but only in unix.
Greetings, I have a D2-310 on RAID1. I am using it on 3 different devices: Ubuntu, Raspbian and W10. In all 3 devices it works correctly, but in the two Unix ones (Ubuntu and Raspbian) the green leds...
View ArticleUSB Series • Re: Problem with RAID Manager of D5-300 not compatible with...
It's been half a year now... I'm cutting bait. I trusted Terramaster, but it seems that that was my mistake.I'm now just looking for a way to recover my data that seems to be held hostage and remove...
View ArticleNetwork & Remote Access • Re: Trying to remote mount SMB folder
What kind of device is your remote SMB folder located on? Is it a computer with Windows OS?WD PR4100 NASStatistics: Posted by Scewter63 — Yesterday, 22:33
View ArticleUSB Copy • Re: USB HDD not visible but mounted after upgrading to ^.0
Well TOS will not permit me to create a consecutive Vol after creating of 2 new Pools it defaults to Volume 8 after Volume 6 in single disk modeStatistics: Posted by Mntmck — Today, 02:47
View ArticleNetwork & Remote Access • Re: NAS does not connect to the internet anymore
i fixed the problem - well actually i found the solution (but i still don't know what caused the problem in the first place).This post helped me: viewtopic.php?t=5939I turned off the DHCP option and...
View ArticleNetworking • Re: Why does the IP address of my TNAS appear as 169.254.x.x and...
My F4-223 running TOS 5.1 has a problem connecting to the LAN. After every power down, whether scheduled, manual or following an OS upgrade, the subsequent boot reliably fails to obtain an IP address....
View ArticleUSB Copy • Re: USB HDD not visible but mounted after upgrading to 5.1.67
The cause of this anomaly cannot be confirmed at this time.You may consider updating to the latest TOS5.viewtopic.php?t=6124Please check if you meet the conditions for...
View ArticleSystem Resources • Re: TNAS F2 212 Disk Thrashing
Yes, please check it out. It's been stable for me since with zero thrashing. All notifications as shown in my initial log snippet have stopped cold. I have also experienced NO (yes capitol for...
View ArticleClik here to view.
Storage • Re: Copying files: 25sec transfer 115MB/s - 5 sec. 25MB/s or timeout
Meanwhile the support just did not answer any more. Too a way to handle it and very disappointing! I put so much hours of work in it in testing everything possible and impossible.For example I tested...
View ArticleClik here to view.
Network & Remote Access • All traffic being routed through the OpenVPN?
I am at my wits end with this, on TOS 6 I added a OpenVPN adapter that does not show up in qbittorrent > advanced > network interface (tun0 is missing) I confirmed with ssh (dev/net/tun) that it...
View ArticleInitialization • F5-221 Not on network after power failure
I have an F5-221 which has been set up and working for about 3 years, but I had a power failure and can no longer access it. The power light and all 5 hard drive lights on the front panel are on, the...
View ArticleInitialization • Re: F5-221 Not on network after power failure
Do an install of the current operating system version in use on your device using the '.ins' package, via the 'custom' installation method.You may have search or ask support for the location of the...
View ArticleFAQ & User Guides • Re: Troubleshooting Installation Issues with WD HC550
New compatibility case.Western Digital (DC HC560), FW version:FW 540.Cannot be used on NAS/DAS devices, may cause dead or stuck.Statistics: Posted by TMzethar — Today, 11:45
View ArticleDocker • Re: Docker engine not enabled on reboot
Is it possible to reenable docker engine from command line? I could use crontab to enable after sometime on bootYou can try it, the command is:/etc/init.d/DockerEngine startI am getting this in TOS6...
View ArticleDocker • Re: Cannot download images in Docker
Please TM staff, update Docker app so we can download images again.Until then, you can:- Download Docker on your computer- Open a command line interface as admin- Download the image you can (for...
View Article